Альтернатор A.R.K4F — бесщёточный PMG-альтернатор промышленного класса
A.R.K4F обеспечивает высокую эффективность, стабильность напряжения и длительный срок службы для промышленных и арендных генераторных установок.
[rank_math_breadcrumb]
A.R.K4F обеспечивает высокую эффективность, стабильность напряжения и длительный срок службы для промышленных и арендных генераторных установок.
Electrical Performance
Type: Three-phase, brushless, self-excited synchronous alternator with PMG excitation
Frequency: 50 / 60 Hz
Power Factor: 0.8
Voltage Range: 380/220V – 480/277V (reconnectable; star, delta, or parallel configurations)
Voltage Regulation: ±1.0%
Total Harmonic Distortion (THD): <5.0% (balanced load), <1.5% (no load)
Efficiency: Up to 94.1% at full load
Sustained Short Circuit Current: >300% rated current for 10 seconds
Overload Capacity: 110% for one hour in a six-hour cycle
Telephone Harmonic Factor (THF): <2%
Telephone Interference Factor (TIF): <50
Short Circuit Ratio (1/Xd): 0.09
Reactances (per-unit at rated kVA):
Xd (Synchronous): 2.17–3.21
X’d (Transient): 0.14–0.18
X’’d (Subtransient): 0.09–0.13
Xq (Quadrature): 1.66–2.84
X’’q (Quadrature Subtransient): 0.25–0.42
X₂ (Negative Sequence): 0.16–0.28
X₀ (Zero Sequence): 0.06–0.10
Time Constants:
Transient (T’d): 0.08 s
Subtransient (T’’d): 0.019 s
Armature (Ta): 0.018 s
Open Circuit Field (T’do): 1.7 s
Short-Circuit Capability: 300% of rated current for 10 seconds
Construction & Design
Insulation Class: H (125°C rise at 40°C ambient)
Protection: IP23
Cooling System: Self-ventilated air flow (0.486 m³/s @50Hz, 0.580 m³/s @60Hz)
Frame Material: Rigid steel frame with cast aluminum front and rear covers
Winding: Double-layer stator winding, 2/3 pitch design to reduce harmonic distortion
Rotor: Damped rotor with dynamic balancing per BS6861
Bearings:
Drive End: 6317 (sealed-for-life ball bearing)
Non-Drive End: 6314 (sealed-for-life ball bearing)
Overspeed Capability: 120% of rated speed (2250 rpm)
Leads: 12 leads, reconnectable for multiple configurations
Moment of Inertia (WR²):
Single Bearing: 5.43 kg·m²
Double Bearing: 5.23 kg·m²
Weight:
Complete Alternator: 1160 kg
Rotor: 440–463 kg
Stator: 535 kg
Shipping Weight: 1775–1780 kg
Packing Dimensions: 155×87×107 cm (50Hz), 156×87×107 cm (60Hz)
Regulation & Control
Excitation System: PMG excitation with AVR
AVR Model: MX341 (standard), optional SX460, SX440, AS440, MX321
Voltage Regulation Accuracy: ±1.0%
Parallel Operation: Supported (AVR dependent)
RFI Suppression: Complies with BS EN 61000-6-2 and BS EN 61000-6-4, VDE 0875G/N
Low-Speed Voltage Drop Protection: Standard
Standards Compliance: IEC60034, GB755, BS5000, NEMA MG1-22, CSA C22.2-100, AS1359
Certification: ISO9001 Quality Management System
Environmental Parameters
Operating Temperature: –15°C to +40°C
Relative Humidity: Up to 95% (non-condensing)
Altitude: Up to 1000 m without derating
Noise & Vibration: Balanced to BS6861 standards
Cooling Air Requirement: 0.486 m³/s @50Hz, 0.580 m³/s @60Hz
Performance Summary
Voltage Dip (Transient Load): ≤25% at 0.8 power factor
Recovery Time: <0.5 seconds
Locked Rotor Motor Starting: >300% of rated current
Efficiency Range: 93.4–94.1% across load range
Applications: Prime power, standby, telecom, mobile lighting towers, railway, refrigeration, and rental generator systems