-
Type: Three-phase, brushless synchronous alternator with PMG excitation
-
Frequency: 50 / 60 Hz
-
Power Factor: 0.8
-
Voltage Range: 380/220V – 480/277V (configurable in star, delta, or parallel star)
-
Voltage Regulation: ±1.0%
-
Total Harmonic Distortion (THD): <5% (balanced linear load), <1.5% (no-load)
-
Sustained Short Circuit Current: >300% rated current for 10 seconds
-
Efficiency: Up to 96.4% depending on frequency and load
-
Overload Capacity: 110% for one hour in a six-hour cycle
-
Telephone Harmonic Factor (THF): <2%
-
Telephone Interference Factor (TIF): <50
-
Short Circuit Ratio (1/Xd): 0.19 typical
-
Power Ratings (Winding 311):
-
Reactances (Per Unit at Rated kVA):
-
Xd (Synchronous): 2.26–3.23
-
X’d (Transient): 0.18–0.25
-
X’’d (Subtransient): 0.07–0.13
-
Xq (Quadrature): 2.04–3.16
-
X’’q (Quadrature Subtransient): 0.22–0.27
-
X₂ (Negative Sequence): 0.14–0.16
-
X₀ (Zero Sequence): 0.04–0.06
-
Leakage Reactance (XL): 0.03
-
Time Constants:
-
Excitation System: PMG excitation with brushless AVR
-
AVR Models: MX321 (standard), optional MX341, SX440, SX460, AS440
-
Voltage Regulation Accuracy: ±1.0%
-
Parallel Operation: Supported (AVR-dependent)
-
Protection Features:
-
Stator winding and bearing overheat protection
-
Anti-condensation heater (optional)
-
Low-speed voltage drop protection
-
RFI Suppression: Complies with BS EN 61000-6-2 & BS EN 61000-6-4, VDE 0875G/N
-
Standards Compliance: IEC60034, GB755, BS5000, NEMA MG1-22, CSA C22.2-100, AS1359
-
Certification: ISO9001 Quality Management System