[rank_math_breadcrumb]

Генератор A.R.K184F

Альтернатор A.R.K184F – Надёжный бесщёточный альтернатор для промышленной энергетики

A.R.K184F обеспечивает стабильное напряжение и чистую форму сигнала, что делает его подходящим для промышленных и резервных генераторных установок.

Получить предложение

Номинальная мощность

Максимальная мощность

Скорость

Напряжение

Коэффициент мощности

Electrical Performance

  • Type: Three-phase, brushless, self-excited synchronous alternator

  • Frequency: 50 / 60 Hz

  • Power Factor: 0.8

  • Voltage Range: 190–480 V (configurable in star, delta, or parallel star)

  • Voltage Regulation: ±1.0%

  • Total Harmonic Distortion (THD): <5% (balanced load), <1.5% (no-load)

  • Sustained Short Circuit Current: >300% of rated current

  • Efficiency: 84.2–87.3% (depending on frequency and voltage)

  • Telephone Harmonic Factor (THF): <2%

  • Telephone Interference Factor (TIF): <50

  • Excitation System: Self-excited, AVR-controlled

  • AVR Models: SX460 (standard), SX440 / AS440 / MX341 / MX321 optional (PMG-compatible)

  • Short Circuit Ratio (1/Xd): 6.1 typical

Reactances (Per Unit, Saturated)

  • Xd (Synchronous): 1.53–2.16

  • X’d (Transient): 0.158–0.210

  • X’’d (Subtransient): 0.10–0.15

  • Xq (Quadrature): 0.77–1.09

  • X’’q (Quadrature Subtransient): 0.17–0.25

  • X₂ (Negative Sequence): 0.14–0.20

  • X₀ (Zero Sequence): 0.07–0.09

  • Leakage Reactance (XL): 0.06–0.09

  • Time Constants:

    • Transient (T’d): 0.022 s

    • Subtransient (T’’d): 0.005 s

    • Armature (Ta): 0.0065 s

    • Open Circuit Field (T’do): 0.4 s

Construction & Design

  • Insulation Class: H (125°C rise at 40°C ambient)

  • Protection: IP23 (optional IP44 with 5–10% derating)

  • Cooling: Self-ventilated air cooling

    • 50 Hz: 0.095 m³/s (200 cfm)

    • 60 Hz: 0.119 m³/s (250 cfm)

  • Frame: Steel frame with cast aluminum front and rear covers

  • Stator: Double-layer winding, 2/3 pitch eliminates triple harmonics

  • Rotor: Damped cage rotor, dynamically balanced to BS6861 standards

  • Bearings:

    • Drive End: 6309-2RS (ISO standard, sealed-for-life)

    • Non-Drive End: 6306-2RS (ISO standard, sealed-for-life)

  • Overspeed Capability: 120% of rated speed (2250 rpm)

  • Leads: 12 reconnectable leads (star, delta, or parallel star)

  • Stator Resistance: 0.25 Ω/phase (22°C, star connection)

  • Rotor Resistance: 0.74 Ω (22°C)

  • Rotor Inertia (WR²): 0.1909 kg·m²

Dimensions & Weight

  • Rotor Weight: 49.7–50.5 kg

  • Stator Weight: 55 kg

  • Complete Alternator Weight: 151–154 kg

  • Shipping Weight: 141–156 kg (crated)

  • Packing Dimensions: 84 × 59 × 75 cm

Regulation & Control

  • Excitation: Self-excited, AVR-controlled

  • AVR Models: SX460 (standard), SX440 / AS440 / MX341 / MX321 optional

  • Voltage Regulation Accuracy: ±1.0%

  • Parallel Operation: Supported (AVR-dependent)

  • RFI Suppression: BS EN 61000-6-2 & BS EN 61000-6-4, VDE 0875G/N compliant

  • Standards Compliance: IEC60034, GB755, BS5000, VDE0530, NEMA MG1-22, CSA C22.2-100, AS1359

  • Certification: ISO9001 Quality Management System

Environmental Parameters

  • Operating Temperature: –15°C to +40°C

  • Relative Humidity: Up to 95% (non-condensing)

  • Altitude: Up to 1000 m without derating

  • Cooling Air Requirement: 0.095–0.119 m³/s

  • Noise & Vibration: Balanced per BS6861 mechanical standards

Performance Summary

  • Efficiency Range: 84–87.3%

  • Voltage Dip (Transient Load): ≤25% at 0.8 PF

  • Recovery Time: <0.5 seconds

  • Locked Rotor Motor Starting: >300% rated current

  • Applications: Prime power, standby, rental, telecom, mobile, lighting tower, refrigeration, and railway generator systems

Datasheet

Download

Сопутствующие продукты