[rank_math_breadcrumb]

Alternator A.R.K224C

A.R.K224C Alternator – Heavy-Duty Brushless Alternator for Industrial and Standby Applications

The A.R.K224C alternator, engineered by Arken Power Solutions, is a three-phase brushless synchronous alternator designed to deliver stable and efficient power across industrial, rental, and continuous-duty generator systems. It features a self-excited AVR-regulated system (SX460 standard, SX440 optional) ensuring ±1% voltage regulation, THD below 5%, and efficiency up to 88.6%. With Class H insulation, IP23 protection, and a durable steel structure, the A.R.K224C combines strength, performance, and reliability. Fully compliant with IEC60034, BS5000, NEMA MG1-22, and ISO9001, this alternator is built to operate efficiently in demanding environments, providing consistent output for industrial and standby power applications.

GET A QUOTE

Alternator Model

A.R.K224C

50Hz (kVA)

42.5

60Hz (kVA)

52.5
Control System SELF EXCITED
A.V.R. OPTIONAL SX440
Voltage Regulation ± 1.0 %
Sustained Short Circuit >300% OF RATED CURRENT
Rated Power Factor0.8

Electrical Performance

  • Type: Three-phase, brushless, self-excited synchronous alternator

  • Frequency: 50 / 60 Hz

  • Power Factor: 0.8

  • Voltage Range: 190–480 V (configurable in series star, parallel star, or delta)

  • Voltage Regulation: ±1.0%

  • Total Harmonic Distortion (THD): <5% (balanced load), <1.5% (no-load)

  • Sustained Short Circuit Current: >300% of rated current

  • Efficiency: Up to 88.6% depending on load and voltage

  • Telephone Harmonic Factor (THF): <2%

  • Telephone Interference Factor (TIF): <50

  • Excitation System: Self-excited, AVR-controlled

  • AVR Models: SX460 (standard), SX440 (optional), MX341 or MX321 (with PMG, optional)

  • Short Circuit Ratio (1/Xd): 6.0 typical

Reactances (Per Unit, Saturated)

  • Xd (Synchronous): 2.19–3.03

  • X’d (Transient): 0.16–0.22

  • X’’d (Subtransient): 0.10–0.15

  • Xq (Quadrature): 1.01–1.40

  • X’’q (Quadrature Subtransient): 0.13–0.16

  • X₂ (Negative Sequence): 0.12–0.14

  • X₀ (Zero Sequence): 0.08–0.10

  • Leakage Reactance (XL): 0.07–0.10

  • Time Constants:

    • Transient (T’d): 0.025 s

    • Subtransient (T’’d): 0.006 s

    • Armature (Ta): 0.005 s

    • Open Circuit Field (T’do): 0.65 s

Construction & Design

  • Insulation Class: H (125°C rise at 40°C ambient)

  • Protection: IP23 (optional IP44 with 5–10% derating)

  • Cooling: Self-ventilated air cooling

    • 50 Hz: 0.216 m³/s (458 cfm)

    • 60 Hz: 0.281 m³/s (595 cfm)

  • Frame: Steel structure with cast aluminum front and rear covers

  • Stator: Double-layer winding, 2/3 pitch eliminates triple harmonics

  • Rotor: Damped cage rotor, dynamically balanced per BS6861 standards

  • Bearings:

    • Drive End: 6315-2RS (sealed-for-life)

    • Non-Drive End: 6310-2RS (sealed-for-life)

  • Overspeed Capability: 120% of rated speed (2250 rpm)

  • Leads: 12 reconnectable leads (star, delta, or parallel star)

  • Stator Resistance: 0.181 Ω/phase (22°C, star connection)

  • Rotor Resistance: 0.59 Ω (22°C)

  • Rotor Inertia (WR²): 0.3667 kg·m² (two-bearing) / 0.3987 kg·m² (single-bearing)

Dimensions & Weight

  • Wound Rotor Weight: 70.58 kg (two-bearing) / 78.95 kg (single-bearing)

  • Wound Stator Weight: 75 kg

  • Complete Alternator Weight: 280 kg (two-bearing) / 271 kg (single-bearing)

  • Shipping Weight: 294–301 kg (crated)

  • Packing Dimensions: 95–97 × 57 × 96 cm

Regulation & Control

  • Excitation: Self-excited, AVR-controlled

  • AVR Models: SX460 (standard), SX440 / MX341 / MX321 optional

  • Voltage Regulation Accuracy: ±1.0%

  • Parallel Operation: Supported (AVR-dependent)

  • RFI Suppression: BS EN 61000-6-2 & BS EN 61000-6-4, VDE 0875G/N compliant

  • Standards Compliance: IEC60034, GB755, BS5000, VDE0530, NEMA MG1-22, CSA C22.2-100, AS1359

  • Certification: ISO9001 Quality Management System

Environmental Parameters

  • Operating Temperature: –15°C to +40°C

  • Relative Humidity: Up to 95% (non-condensing)

  • Altitude: Up to 1000 m without derating

  • Cooling Air Requirement: 0.216–0.281 m³/s depending on frequency

  • Noise & Vibration: Balanced per BS6861 mechanical standards

Performance Summary

  • Efficiency Range: 86.6–88.6%

  • Voltage Dip (Transient Load): ≤25% at 0.8 PF

  • Recovery Time: <0.5 seconds

  • Locked Rotor Motor Starting: >300% rated current

  • Applications: Prime power, standby, rental, telecom, mobile, lighting tower, refrigeration, and railway generator systems

Datasheet

Download

Related Products