Альтернатор A.R.K4D — эффективный бесщёточный альтернатор для резервного питания
A.R.K4D сочетает надёжность, высокую эффективность и минимальное обслуживание для промышленных и резервных энергосистем.
[rank_math_breadcrumb]
A.R.K4D сочетает надёжность, высокую эффективность и минимальное обслуживание для промышленных и резервных энергосистем.
Electrical Performance
Type: Three-phase, brushless, self-excited synchronous alternator
Frequency: 50 / 60 Hz
Power Factor: 0.8
Voltage Range: 380/220V – 440/254V (50Hz) / 416/240V – 480/277V (60Hz)
Voltage Regulation: ±1.0%
Total Harmonic Distortion (THD): <5% (linear load), <1.5% (no-load)
Sustained Short Circuit Current: >300% rated current for 10 seconds
Efficiency: Up to 93.7% at full load
Telephone Harmonic Factor (THF): <2%
Telephone Interference Factor (TIF): <50
Overload Capacity: 110% for one hour in six-hour cycles
Reactances:
Xd: 3.11
X’d: 0.20
X’’d: 0.14
Xq: 2.71
X’’q: 0.39
Time Constants:
Transient (T’d): 0.08 s
Subtransient (T’’d): 0.019 s
Armature (Ta): 0.018 s
Construction & Design
Insulation Class: H (125°C rise at 40°C ambient)
Protection: IP23
Cooling System: Self-ventilated air cooling (0.486 m³/s @50Hz, 0.580 m³/s @60Hz)
Winding: Double-layer stator winding, 2/3 pitch
Rotor Type: Damped rotor with high mechanical balance
Bearings:
Drive End: 6317 (sealed-for-life)
Non-Drive End: 6314
Frame Material: High-grade steel frame with aluminum covers
Overspeed Capability: 120% of rated speed (2250 rpm)
Number of Leads: 12 leads – reconnectable (star, delta, parallel)
Moment of Inertia (WR²):
Single-bearing: 4.08 kg·m²
Double-bearing: 3.88 kg·m²
Weight: Approx. 940–950 kg total
Stator: 415 kg
Rotor: 361 kg
Regulation & Control
Excitation System: Self-excited, brushless
AVR Models: SX460 (standard), SX440, AS440, MX341, MX321 (optional PMG)
Regulation Accuracy: ±1.0%
Parallel Operation: Supported (with compatible AVR models)
RFI Suppression: Complies with BS EN 61000-6-2 and BS EN 61000-6-4
Standards: IEC60034, BS5000, NEMA MG1-22, ISO8528-3
Certification: ISO9001 quality management
Environmental Parameters
Operating Temperature: –15°C to +40°C
Relative Humidity: Up to 95% (non-condensing)
Altitude: Up to 1000 m without derating
Noise and Vibration: Balanced per BS6861 mechanical standards
Performance Summary
Voltage Dip (Transient Load): ≤25% at 0.8 power factor
Recovery Time: <0.5 seconds
Locked Rotor Motor Starting: >300% of rated current
Efficiency Range: 92–93.7% across full load
Suitable Applications: Prime power, standby, telecom, rental, and industrial generators